X71 circular electro permanent magnetic chuck
Product Introduction
X71 circular electronic controlled permanent magnetic chuck is
designed with “multi-magnetic circuit and electric control”, its
magnetism is adjustable. After magnetization, X62 does not need to
continue to supply electric power. Electric power is supplied by
quick connection or electric slip ring. Two clamps are accessible
during the processing, work piece can be machined freely. It can
really play the function “one clamping to complete three-sided
processing”. X62 is suitable for work piece that not easy to clamp,
such as thin wall parts, flange parts, shaped parts, etc. It is
widely used on horizontal lathe, vertical lathe, vertical grinder,
5 axis machining center, turning and milling composite machine tool
and so on."
Machining center sucker in the course of the work does not require
electricity, rely on permanent magnet suction suction workpieces,
to avoid the electromagnetic system in the sudden power failure and
damage to the magnetic loss of the workpiece and the risk of
falling off the workpiece. As the permanent magnet sucker only in
the magnetization and demagnetization process within 1-2 seconds of
the use of electricity, work without the use of any energy and
produce safe, strong and efficient force, both economic and
environmentally friendly.
This new type of CNC machining center disk in the instant power
after the permanent magnet can be hardened workpiece positioning
processing, the application of reverse current, you can demolish
the workpiece removed, safe and energy saving, easy to operate, no
temperature rise and change, processing accuracy high.
Strong support. In theory, the unit of permanent magnet fixture
clamping force of 150KN, far greater than the cutting force, even
the uneven surface of the fur, but also safe to suck, even if the
milling quality of 52HRC hardened hardened workpiece, the same can
normal work.
Product Parameters
Model | Dimensions(MM) | Polar Number | Channel Number | Voltage (V) | Max RPM
[1/min] | Net WT (KG) | Overall size (CM) |
| φD | φd | H |
| X71-400 | 400 | 60 | 100 | 12 | 1 | 220/480 | 1000 | 98 | 50*50*20 |
| X71-500 | 500 | 60 | 100 | 12 | 1 | 220/480 | 800 | 150 | 60*60*20 |
| X71-600 | 600 | 80 | 100 | 12 | 1 | 220/480 | 650 | 220 | 70*70*20 |
| X71-700 | 700 | 80 | 110 | 12/16 | 2 | 220/480 | 600 | 290 | 80*80*22 |
| X71-800 | 800 | 120 | 110 | 12/16 | 2 | 220/480 | 500 | 390 | 90*90*22 |
| X71-1000 | 1000 | 200 | 120 | 16/24 | 2 | 220/480 | 400 | 660 | 110*110*22 |
| X71-1200 | 1200 | 250 | 120 | 16/24 | 2 | 220/480 | 320 | 950 | 130*130*22 |
| X71-1400 | 1400 | 300 | 130 | 18/24 | 4 | 220/480 | 260 | 1400 | 150*150*25 |
| X71-1600 | 1600 | 400 | 130 | 24/32 | 4 | 220/480 | 240 | 1850 | 170*170*25 |
| X71-1800 | 1800 | 500 | 130 | 24/32 | 4 | 220/480 | 160 | 2300 | 190*190*25 |
| X71-2000 | 2000 | 600 | 135 | 24/36 | 6 | 220/480 | 128 | 2900 | 210*210*26 |
| X71-2500 | 2500 | 800 | 135 | 36/48 | 8 | 220/480 | 100 | 4500 | 268*268*26 |
| X71-3000 | 3000 | 800 | 140 | 36/48 | 8 | 220/480 | 80 | 6800 | 318*318*26 |
| X71-3500 | 3500 | 1000 | 140 | 48/60 | 10 | 220/480 | 60 | 9500 | 368*368*26 |
Note: Other specifications can be customized ,please call for further information.
Suggestion: You can choose two installation methods (Quick plug/electric conductive slip ring). |
|
| Permanent Magnetic Chuck | Electromagnetic Magnetic Chuck | Electro Permanent Magnetic Chuck |
| Magnetic Source | Ndfeb | Coil and Core | Ndfeb Anico |
| Magnetic Force Principle | Internal Magnetic Fields | Constant Current | Conversion by Electronic Control Device |
| Usage | Manual | Electric Control Device | Electric Control Device |
| Precision | About 0.02-0 05 (the Error Increased Bysizes) | About 0.01-0.02 | About 0 002-0.005 |
| Potential Risk | Prone to Security Incidents | Prone to Security Incidents | Absolute Safety |
| Magnetic Regulation | Unable to Adjust | Electric Control Device to Adjustsuction | Electric Control Device to Adjust Suction |
| Suction | Small | Medium | Large |
| Residual Magnetism | More Remanence, Demagnetiz Ation Devicerequired | Less Remanence, Demagnetizationdevice Required | Automatic Demagnetiz Ation Withoutdemagnetization Device |
| Thermal Deformation | No | Continuous Power On, Heat Generationand Thermal Deformation | No |
| Applicable Workpiece | Thin and Small Workpieces | Thin and Small, Medium Sizedworkpieces | All Kinds of Workpieces |
| Application | Mainly Used for Grinding Machine | Mainly Used for Grinding Machine | For Grinding/milling/lathe Manchine and Soon. |
| Accessories | No | Electric Control Device | Electric Control Device |
| Serive Life | 3-5 Years | 6-10 Years | 20 Years |
Product Accessories
Magnetic Blocks
Use Magnetic Blocks to Machines 6 Sides of the Workpiece at Same
Time. Blanks and Irregular
Workpieces Could Be Adjusted to Adapt to Their Roughness by Sliding
Up and Down the Elastic Blocks, Toprovide Larger Magnetic Force.
More processing schemes can be provided by using different magnetic
guide blocks pardigm as below
PULSE CONTROLLER
Product introduction:
safety protection: The spindle linkage can be realized by unlocking
the input contact signal and themagnetized output contact. lt is
equipped with adjustable magnetoelectric current (or short
circuit)protection and undercurrent (or circuit break) alarm
functions.
Simple operation: all setting parameters and running state can be
monitored through the host panel, andthe power frequency can be
automatically tracked;Flexible configuration, easy to use.
control interface: it is equipped with a variety of alternative
control interfaces, which can satisfy allkinds of on-line control
requirements. It also has alternative control (remote) or PLC
interfaces.
Install and Use
INSTRALL
Fixed In Clamp Slot
Secure With Screw Holes
MAGNETIZATION STEPS
1. Plug in
2. Press the
magnetization button
3. Until the green light isalways on
4. Unplug the plug andciose the cover
DEMAGNETIZATION STEPS
1. Plug in
2. Press the demagnetization button
3. Until the red light isalways on
4. Unplug the plug andclose the cover
FAQ
Q: Are you manufactory or trade company.
A: We are both factory and trade company, we have lots of Cooperation factory with different quality and prices, just tell us
your need, there is always a product suitable for you.
Q: Where do you located:
A: JYC technology Co.,Ltd. located at Wuxi City, Jiangsu Province,
1 hour by fast rail way to Shanghai City.
Q: Production time:
A: Normally,We'll have regular items in stock, customized products
will take 7-14 work days.
Q: Payment term:
A: TT, credit card, L/C, Western Union, Paypal and so on, we accept all kinds of payment.
Q: What's your work time:
A: Normally, our work time is 9:00 AM to 17:00 PM Beijing time, but
if you have emergency, Please contact us freely at any time. Our salesman will sulove
your problem as soon as possible.
