XH42 rotary permanent magnetic chuck
Product introduction:
Electromagnetic permanent magnet fixture in the suction clamping
process, but there is magnetic force on the surface of the fixture,
the other surface does not exist magnetic flux leakage phenomenon,
not only the tool without any effect, and remove the workpiece, the
fixture and the workpiece will not exist remanence , Because the
system has an internal electro mechanical demagnetization device,
the workpiece and fixture can be automatically demagnetized.
XH42 rotary permanent magnetic chuck has a calibrated scale, angle
is adjustable by ± 90°, which is used for high precision grinding.
XH42 is suitable for all kinds of precision plane grinder.
Specification sheet
| Model | Dimensions (MM) | Net weight (KG) |
| A | B | C | D | E | F | G | I | J | K | L | M | N |
| XH42 100*175A | 100 | 175 | 135 | 100 | 1.5(1+0.5) | 292 | 25 | 50 | 14 | 103 | 50 | 163 | 100 | 18.5 |
| XH42 125*250A | 125 | 250 | 250 | 100 | 1.5(1+0.5) | 370 | 25 | 50 | 14 | 103 | 50 | 163 | 100 | 25 |
| XH42 150*150A | 150 | 150 | 150 | 100 | 1.5(1+0.5) | 270 | 25 | 50 | 14 | 103 | 50 | 163 | 100 | 21 |
| XH42 150*300A | 150 | 300 | 300 | 100 | 1.5(1+0.5) | 420 | 25 | 50 | 14 | 103 | 50 | 163 | 100 | 31 |
| Note: Other specifications can be customized ,please contact us for further information. |
|
USAGE METHOD
1. Wipe the bottom surface of the suction cup and gently place it
on the workbench of the machine tool withthe nameplate facing out,
and then fasten the base with the bolt pressing plate
2. Check or repair the parallelism of the working face of the
suction cup to the working surface of themachine tool
3. Place the workpiece on the working surface of the suction cup,
and then insert the wrench into the shaft hole and turn it 180
degrees clockwise to align the red mark with "on" to suck the
workpiece for processing.4. After the workpiece iS processed,
insert the wrench into the shaft hole and turn it 180 degrees anti
clock wise to align the red mark with "off' to remove the
workpiece.
MATTERS NEEDING ATTENTION
1. It is strictly prohibited to knock and scratch, and the surface
shall be cleaned before use to avoid affecting the accuracy.
2. Use ambient temperature -40 'C ~ 50 'C to prevent magnetic force
reduction
3. After use, the working surface shall be coated with antirust oil
to prevent rust.
4. Please pay attention to the safety when processing, pay
attention to the speed and the cutting amount(grinding amount) when
processing hard materials, so as to prevent the workpiece from
flying out.
FAQ
Q: Are you manufactory or trade company.
A: We are both factory and trade company, we have lots of
Cooperation factory with different quality and prices, just tell us
your need, there is always a product suitable for you.
Q: Where do you located:
A: JYC technology Co.,Ltd. located at Wuxi City, Jiangsu Province,
1 hour by fast rail way to Shanghai City.
Q: Production time:
A: Normally,We'll have regular items in stock, customized products
will take 7-14 work days.
Q: Payment term:
A: TT, credit card, L/C, Western Union, Paypal and so on, we accept
all kinds of payment.
Q: What's your work time:
A: Normally, our work time is 9: 00 AM to 17: 00 PM Beijing time,
but if you have emergency, Please contact us freely at any time.
Our salesman will sulove your problem as soon as possible.
